ILW5DW4 H

ILW5DW4 H Specifications HOUSING: Cool external temperatures - all below 42ºC - so the luminaire is cool to the touch, including the lens. Perfect for high pedestrian traffic and plant life applications. Exceeds European standard EN 563 both 1 second (85ºC for composite, 80ºC for glass) and 4 seconds (74ºC for composite, 70ºC for glass) of contact. One-piece injection molded ULTEM® High Performance Polymer composite. Lens ring is a Single-piece injection molded ULTEM® High Performance Polymer with gasketed lens. Twist-off operation for ease of maintenance. Gasketing is silicone. Fasteners are 300 series stainless steel. FINISH: Composite is textured, pressure formed, molded-in-color. OPTICAL ASSEMBLY: Warm (3000K), amber-colored tempered glass lens. Integral collimating flood (25°) optics. LAMPING: Type III Luxeon® white high brightness (HB) LEDs. Deliver 70% lumen maintenance at 50,000 hours. Cool white (5500K nominal). ELECTRICAL ASSEMBLY: Powered by Advance™: Integral Advance™ electronic LED driver. UL class2. -40ºC/F minimum starting temperature. Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. Integral surge protector built into LED driver circuit. 12 volts, 12.4 total watts. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. WARRANTY: Three-year limited warranty. CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. IP RATING: IP66/68: Dust-tight and dual rated - sealed against direct jets of water and against continuous immersion at a depth greater than 1 meter (3.28 feet). Height : 4 3/8" (111mm) Width: 4 1/8" (105mm) Max. Weight: 1.24 lb. Ordering Guide Example: ILW5DW4 H