RL4D3 A

RL4D3 A Specifications HOUSING: Cool external temperatures - all below 40ºC - so the luminaire is cool to the touch, including the lens. Perfect for high pedestrian traffic and plant life applications. Exceeds European standard EN 563 both 1 second (74ºC for coated metal, 80ºC for glass) and 4 seconds (61ºC for coated metal, 70ºC for glass) of contact. Die-cast aluminum. Stem is extruded aluminum. ½" NPS male threads to screw on to accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel. Gasketing is silicone. FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. OPTICAL ASSEMBLY: Frosted tempered glass lens. Spun aluminum reflector with white thermoset powdercoat. LAMPING: Type III Luxeon® white high brightness (HB) LEDs. Deliver 70% lumen maintenance at 50,000 hours. Cool white (5500K nominal). ELECTRICAL ASSEMBLY: Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. Integral surge protector built into LED driver circuit. 12 volts, 9.3 total watts. Powered by Advance™: Integral Advance™ electronic LED driver. UL class2. -40ºC/F minimum starting temperature. Low voltage transformer must be ordered to power the fixtures. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. WARRANTY: Three-year limited warranty. CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. IP RATING: IP55: Dust-protected and sealed against water jets. Height : 17 1/4" (435mm) Width: 10" (253mm) Max. Weight: 3.18 lb.