MUL4N-S7 Brass Pathlyte

MUL4N-S7 Brass Pathlyte w 20 WATT T3 LAMP Specifications Housing: Die-cast brass. Roof has dual stainless steel hinge with stainless steel spring-lock for tool-less entry and relamping. ½" NPS male threads to screw on to accessory mounting stake or junction box, sold separately. Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Natural Brass (N) is as-cast and tumble polished. Oiled Brass (OB) is chemically dipped to achieve a dark pre-aged patina finish. Optical Assembly: Spun aluminum reflector with white thermoset powdercoat. Frosted tempered glass sprinkler shield includes top and bottom silicone gaskets for tight seal. Underside of roof has white reflector, with center ALZAK© reflector for optimal light distribution. Lamping: 20W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. Warranty: Lifetime limited warranty. Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. Height: 19 1/2" (495mm) Width: 5 1/16" (129mm) Max. Weight: 3.25